Siser P.S. Adhesive


$10.56 / metre
Excl. GST
Siser P.S. Adhesive 500mm Adhesive Carrier
Order AmountPrice Per Unit Excl. GSTSAVE
1 - 9 metre $10.56 Save 0%
10 - 24 metre $9.60 / metre Save 9%
25+ metre $8.73 / metre Save 17%

Do you require cutting services?

Click here
Product Specifications

Siser PS Adhesive is just like the Siser PS range with an adhesive carrier side and a material side. Be sure to remove the pink protective layer before cutting. The Carrier side is much smoother and shinier than the material side. The material side is just a layer of transparent glue, but not just any glue, Siser PS Adhesive. This PS Adhesive can be used with any screen printing foils as well as fabrics and other materials that lend themselves to adhesion. The cloudy appearance of the PS Adhesive turns clear when applied, and can be cut on any Vinyl cutter.

Cut your design in reverse and weed, as the adhesive is clear it is best to do on a darker colour surface. Once you think you have removed all the excess adhesive flip over the design to make sure you have got it all. Now you are ready to press! Temperature: 150C Pressure: Medium Pre heat your garment for 2-3 seconds to ensure there are no wrinkles. Place the adhesive with the carrier side face up, cover with a Teflon sheet and press for 5 seconds. Leave the garment on the heat press and peel the carrier warm. You will notice the clear shiny adhesive is left behind. Then its time to add the top layer....make sure you cut a piece large enough (eg: screen printing, or Forever hot stamping foil) to cover the design. Place on top of the PS Adhesive with the colour side up, cover with the Teflon sheet and press for 10 seconds. You will see how the adhesive grips the foil. Remove the garment from the press and wait for the until the foil is cool to touch before peeling off. Now you will be rewarded with a shiny super cool garment!

REACH compliant

Certified VeganOK

• Available widths: 500mm

• Adheres to: Cotton, Polyester, Poly/cotton blends, Not suited for treated and dye sublimated textiles

• Heat Application: Pre-heat for 2-3 seconds, 150 Degrees, 5 Seconds, Medium Pressure, Peel Hot or Cold

• Specification: 60 Micron, Adhesive polyester carrier, Blade: 45 deg

• Washing: Wait 24hrs before washing, Up to 40 degree washability - inside-out, Do not tumble dry, Do not dry clean, No bleach or aggressive chemicals, Can iron inside-out

More Information
Adhesive ColourClear
Backing LinerPolyester
Film Paper TypePolyurethane PU
TechnologyHeat Transfer
Conversion MethodComputer Cut
Surface ShapeVarious
AdhesiveHeat Activated

• 60 micron Copolyester

• Light weight

• Reach compliant


• Cotton

• Polyester

• Poly/Cotton blends and spandex

• Not suitable for treated and dyed sublimated textiles


Siser P.S. Adhesive PDS

Add Slitting Instructions

No. of cuts:


Maximum of 10 cuts per roll. Please contact customer service for additional slitting requirements.
Minimum slit width is 25mm (+/- 3mm) plus a 50mm offcut where required.
Disclaimer – “ Slitting accuracy may vary up to +/- 3mm and may not be offered on all products.”

Product Reviews

There's no reviews for this product.

Write a Product Review

Siser P.S. Adhesive

You are writing a review for:

Siser P.S. Adhesive

Only registered users can write reviews. Please Sign in or create an account